SMB Direct with Emulex

A while a go i was involved in a project were the customer wanted to deploy a 2 node Scale out file server with storage spaces on Windows Server 2012 R2. Since this was my first actual storage spaces and scale out file server deployment (besides a training and testing it in a lab with vm’s) i ran in to some issue’s and problems.

First of all there is a lot of stuff on the internet that is not always entirely true for all scenarios. Settings or test results that are used and reported are not necessarily true in your environment. For example DCB/PFC/QOS settings with Mellanox RoCe adapters are different than with Emulex RoCe adapters. And even with Emulex and HP or Fujitsu branded Emulex cards configuration is not the same. This could be because the vendors don’t know it exactly either and are still struggling with their drivers, firmware and settings, I don’t know. But it’s makes it pretty tough to get it all right. And as I said before, this is the first implementation I did, so I am not an expert on this either, so feel very free to give feedback if needed.

This Technet article describes several does and don’ts with SMB and RDMA. A lot of info and configurations are also available on Jose Barreto’s blog for RDMA and Mellanox RoCe adapters. But since there is very little info with Emulex, I started this blog to write and share my findings.

Read moreSMB Direct with Emulex